A set of refurbished rack mounts and track rod ends were ordered, I then drilled the angle for mounting the brackets and then it was a case of simply bolting it together...
The next part was to attach the motor plate and engine mounts...
Because eventually this car will be producing some monster horsepower I really need it to be securely mounted to the chassis in a way that meant it stayed put.
The front motor plate is exactly what it says, it's an alloy plate that bolts to the front of the engine and then, in turn, bolts to the chassis.
With a little fettling the plate was bolted to the engine...
Because eventually this car will be producing some monster horsepower I really need it to be securely mounted to the chassis in a way that meant it stayed put.
The front motor plate is exactly what it says, it's an alloy plate that bolts to the front of the engine and then, in turn, bolts to the chassis.
With a little fettling the plate was bolted to the engine...
Once that was done it was back to the origami and a template was made for the chassis tabs...
This was transfered to some 1/4" plate that was then simply welded to the chassis...
Some bolt holes drilled, job done!
